Ukungenisa iiKhebhu zokuThengisa kwiiTheminali

injongo
Induction Ukuthengisa iintambo kwizikhululo ngaphantsi kwemizuzwana engama-20 usebenzisa induction.

izixhobo
DW-UHF-6KW-Ndaphatha i-heater ephathwayo

izinto
• 0.078 ″2 (50mm2) Isiphelo sentambo
• 0.078 ″2 (50mm2) intambo
• Ukuthengisa i-alloy Sn60Pb38Cu2

Iiparameters eziphambili
Amandla: 2.8 kW
Ixesha: 15 sec
Ubushushu: 500 ° F (260 ° C)

inkqubo:

  1. 0.078 ″2 (50mm2Isiphelo sentambo siqhotyoshelwe kwi-0.078 ″2 (50mm2) intambo
  2. Indibano ibekwe ngaphakathi kwekhoyili kwaye lokutshisa isetyenziswe.
  3. Ixesha lokushisa li malunga ne-4 -5 sec. Iqondo lokushisa ligcinwa rhoqo ukugqiba inkqubo yokuthengisa. Ukutshintsha inyawo kusetyenziswa ukuqala nokumisa umatshini.
  4. Emva kwe-15 ukuya kwi-20 sec, intambo kunye ne-terminal yentambo zithengiswa ngempumelelo.

Iziphumo / IiNzuzo:
Iinkqubo zokufudumeza ezifanelekileyo ezifanelekileyo zale nkqubo:

DW-UHF-6KW-Ndaphatha i-heater ephathwayo

I-DW-UHF-6KW-i-heater ephathwayo yokungenisa izinto iya kufuna ixesha elide ukufikelela kubushushu kunye nokuzalisa okugqityiweyo.

Ukutshisa ukutshisa inikezela:

  • Amaqhinga aqinileyo ahlalayo
  • Ukukhetha kunye nokuchanekileyo kwindawo yokushisa, okukhokelela ekungahambekini kwenxalenye yoxinzelelo kunye nokudibana
  • Ngaphantsi kwe-oxidation
  • Imijikelezo yokutshisa ngokukhawuleza
  • Iziphumo ezingaphezulu ezifanelekileyo kunye nokufaneleka kwemveliso enkulu yemveliso, ngaphandle kwemfuneko yokucutshungulwa kweetch
  • Itekhnoloji ngaphandle kongcoliseko, ecocekileyo kwaye ikhuselekile